Steel Tension Cable

20150830 - Tension Cable - 02

We invited Architect Juan Alfonso Peña to visit the site one day. He’s been building natural homes for quite some time and had lots of advice regarding the stability of our structure. He made a few recommendations, one was to include more beams in the balcony, another was to include some diagonal supports, and another was some tension cable.

The diagonal supports, or Trusses, have always been part of the design. With the structure of the building exposed it will be easy to add these later as their main function is support in high winds and earthquakes, preventing lateral movement.

The tension cable however is something we did right away. My understanding is that reciprocal roofs only create downwards force, rather than pushing laterally on the columns. But if anything was going to move, it would most likely be that the columns would be forced outwards or that the connections with the beams would break. For this reason we installed two tension cables. One circle through holes in the ends of the beams, and one circle through holes in the tops of the columns. With two 1/2″ tension cables there is no way the circle can get any bigger.

We also wrapped galvanised steel wire around the beams and columns on either side of the cable to prevent the cable from splitting the wood. Finally we added a cable clamp on either side of the beam (or column) to stop it from sliding along the cable.

2 Comments

  1. Tom k says:

    Thanks for all the updates! What’s inspired this recent flurry? Looks like it’s getting there, must be exciting!

    • Rob says:

      Hey Tom! It’s been on my to do list for a while, I’m about 6 months behind with the posts, the roof is actually finished now and I’m not in Ecuador anymore! I had a lot of photos to organise, rename, edit etc. but that’s all done now so the updates will keep on coming over the next few days. Thanks for checking in!

Leave a Comment